BMW X6 M Competition BMW Individual Special Paint Urban Green SUV F96 2020 side view

THE X6 M

BMW M

THE BMW X6 M COMPETITION:
ENGINES & TECHNICAL DATA


Here you can find all the engines, data, specifications and dimensions of the BMW X6 M Models – BMW X6 M Competition, BMW X6 M50i and BMW X6 M50d.
 

Read more
THE X6 MTHE BMW X6 M COMPETITION:<br>ENGINES & TECHNICAL DATA

    ENGINES & TECHNICAL DATA.

    Select Model
    Select Transmission

    Engine

    Cylinder/ Valves per cylinder 8 / 4
    Technical capacity in cm3 4,395
    Stroke/Drilling in mm 88.3 / 89
    Engine performance in kW (hp) 390 (530) / 5500-6000
    Max torque(Nm) per 1/min 750 / 1800-4600
    Compression:1 10.5

    Performance

    Top Speed 155
    Acceleration 4.3

    Measurements

    Length/Width/Height 4,935 / 2,004 / 1,696
    Width incl. mirrors (driver / passenger side) in mm 2212 (1119 / 1093)
    Wheelbase in mm/Wheel turn in m 2,975 / 12.6
    Ground clearance in mm 216
    Measurements
    Measurements

    Weight

    Weight not loaded in kg 2,315
    Weight Max in kg 2,980
    Permitted load in kg 740
    Permitted Axle load front/rear in kg 1,430 / 1,625
    Allowed unbraked trailer load / drawbar load in kg 750 / 140
    Allowed braked trailer load up to 12 % / 8 % incline in kg 2,700 / 2,700
    Trunk capacity min.-max. in l 580 - 1530

    Wheels

    Tire front 275/40 R21 107 Y XL
    Tire rear 315/35 R21 111 Y XL
    Rim front 9,5Jx21 LM
    Rim rear 10,5Jx21 LM

    Consumption

    Combined in mpg 25 - 24.4
    Tank capacity in l 83

    CO2 Emissions

    Combined in g/km 259 - 265

    BMW wheels and tyres EU tyre label close-up

    BMW WHEELS & TYRES.

    We subject the tyres for our vehicles to stringent tests with up to 50 different quality criteria – significantly more than prescribed by the uniform tyre labelling regulation that applies throughout Europe. This is where you will find all the information on the properties of the tyres used at BMW.
    • For plug-in hybrid vehicles these figures were obtained using a combination of battery power and fuel, for battery electric vehicles after the battery had been fully charged. Plug-in hybrid and battery electric vehicles require mains electricity for charging. Figures shown are for comparability purposes. Only compare fuel consumption, CO2 and electric range figures with other cars tested to the same technical procedures. These figures may not reflect real life driving results, which will depend upon a number of factors including the starting charge of the battery, accessories fitted (post-registration), variations in weather, driving styles and vehicle load.


      At temperatures below 0 degrees Celsius, purely electric driving mode of plug-in hybrid models will not be available until the battery has warmed up to an operational condition after the vehicle has travelled a few miles.