BMW 1 Series 128ti F40, three-quarter rear view driving

THE 1

BMW 1 SERIES: ENGINES & TECHNICAL DATA

Discover the powerful petrol and diesel engines as well as the dimensions and other technical data of the BMW 1 Series.

Read more
THE 1BMW 1 SERIES: ENGINES & TECHNICAL DATA

    BMW 1 SERIES: TECHNICAL DATA.

    Engine

    Cylinder/ Valves per cylinder 3 / 4
    Technical capacity in cm3 1,499
    Stroke/Drilling in mm 94.6 / 82
    Engine performance in kW (hp) 100 (136) / 4500-6500
    Max torque(Nm) per 1/min 220 / 1500-4100
    Compression:1 11

    Performance

    Top Speed 132
    Acceleration 8.9

    Measurements

    Length/Width/Height 4,319 / 1,799 / 1,434
    Width incl. mirrors (driver / passenger side) in mm 2081 (1045 / 1036)
    Wheelbase in mm/Wheel turn in m 2,670 / 11.4
    Ground clearance in mm 153

    Weight

    Weight not loaded in kg 1,365
    Weight Max in kg 1,845
    Permitted load in kg 555
    Permitted Axle load front/rear in kg 980 / 940
    Allowed unbraked trailer load / drawbar load in kg 680 / 75
    Allowed braked trailer load up to 12 % / 8 % incline in kg 1,300 / 1,300
    Trunk capacity min.-max. in l 380 - 1200

    Wheels

    Tire front 205/55 R16 91 W
    Tire rear 205/55 R16 91 W
    Rim front 7Jx16 LM
    Rim rear 7Jx16 LM

    Consumption

    Combined in mpg 49.6 - 47.9
    Tank capacity in l 42

    CO2 Emissions

    Combined in g/km 130 - 135

    BMW wheels and tyres EU tyre label close-up

    BMW WHEELS & TYRES.

    We subject the tyres for our vehicles to stringent tests with up to 50 different quality criteria – significantly more than prescribed by the uniform tyre labelling regulation that applies throughout Europe. This is where you will find all the information on the properties of the tyres used at BMW.

    FUEL CONSUMPTION AND CO2 EMISSIONS.

    BMW M135i xDrive:
    Fuel consumption in l/100 km (combined): 7.9–7.4
    CO2 emissions in g/km (combined): 178–167

     

    BMW 128ti:
    Fuel consumption in l/100 km (combined): 7.5–6.8
    CO2 emissions in g/km (combined): 178–168

    Official figures for fuel consumption, CO2 emissions, electricity consumption and electric range were determined in accordance with the prescribed measurement procedure and comply with Regulation (EU) 715/2007 as amended. WLTP figures take into account any optional equipment in the case of ranges. For vehicles newly type-approved since 01.01.2021, the official specifications exist only according to WLTP. Further information on the NEDC and WLTP measurement methods can be found at www.bmw.de/wltp

    Read more
    • For plug-in hybrid vehicles these figures were obtained using a combination of battery power and fuel, for battery electric vehicles after the battery had been fully charged. Plug-in hybrid and battery electric vehicles require mains electricity for charging. Figures shown are for comparability purposes. Only compare fuel consumption, CO2 and electric range figures with other cars tested to the same technical procedures. These figures may not reflect real life driving results, which will depend upon a number of factors including the starting charge of the battery, accessories fitted (post-registration), variations in weather, driving styles and vehicle load.


      At temperatures below 0 degrees Celsius, purely electric driving mode of plug-in hybrid models will not be available until the battery has warmed up to an operational condition after the vehicle has travelled a few miles.